Brake flex hose, Chassis to thrust tube. OEM

Brake flex hose, Front or Rear axle body to thrust tube.
Length: 300mm

Please refer to the manufacturers website for further information

Tech Tips:
Best practice is to always replace brake hoses in a pair on the same axle.
For example: If the left front hose is replaced then the right front should also be replaced at the same time.
This is to avoid dissimilar braking performance on the same axle causing diving or pulling to one side under braking.

Note: Some models have two fitted for the front brake circuit along the thrust tube.

Suitable for most square cab models including the Ex ADF U1700L

This is a high quality OEM FTE part not aftermarket.

Ultimate Mogs Pty Ltd is a factory authorised FTE Valeo distributor